online web builder

Make your own website in a few clicks! Mobirise helps you cut down development time by providing you with a flexible website editor with a drag and drop interface. 

 "Dock Levelers"


 Dock levelers are steel platforms that connect the dock to the vehicle platform to allow forklifts to access the dock and load goods. All dock levellers are designed to be compatible with the existing loading bay configuration.

The vehicle docks in contact with the bumpers, raises the ramp, opens the lip, rests on the platform and loads. The telescopic ramps have an extensible lip and cover the platform as needed, and are essential for recessed loading bays.

The dock pit levelers range includes provides swing or telescopic lip dock levelers, castle and suspended dock levellers, hydraulic dock levelers, manual or electrohydraulic opening, to satisfy the different needs of pits’ construction systems. The best system is prefabrication, which provides defined, fast, cheap and sure results, avoiding mistakes.               

Mobirise

Universal Dock Levelers

The new Universal Dock Leveler can replace several models, making it suitable for different applications. Entirely made of Structural Steel S355.

Mobirise

Swing lip dock: installation with accessories

Electrohydraulic dock leveller with swing lip, strong and lasting, it allows to load the vehicles.

Mobirise

Suspended dock levellers with swing and telescopic tip

Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with accessories. These type of dock levellers follow the necessity of the building prefabrication, suspended onto slabs.

Mobirise

Swing and telescopic lip castle dock levellers

Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with accessories.

Mobirise

Telescopic lip dock levellers

Electrohydraulic dock levellers with telescopic lip, strong and lasting, allow to load the vehicles in the most safe system.

Mobirise

CampisaCast dock levellers

The CampisaCast dock levellers represents the simplest solution for building a loading bay.

Mobirise

Traditional pits fitting systems

The dock leveller is installed into pits made on drawing, that require protection for the rims. 

Mobirise

Prefabricated pits and loading docks

The prefabricated pits (formwork to lose) substitute the pit-rim-frame and allow a simple and quick construction.

Mobirise

Minilinker Dock levellers

Manual dock levelers, counterbalanced with a gas-spring or hydraulically powered, that allow to solve economically.


''DOCK LEVELER SPECIFICATIONS ''


1-on radius ramps, the self-draining lip does not hold the residue normally present on the dock (pieces of pallets, nails, screws, bolts) in the hinge .

2-automatic side flaps for reducing the width of the lip for narrow floors, which automatically retract when the lip is extended and it touches the side walls of the van .

3-ramp-to-bench connection without cutting points for the wheels of the forklifts: the patented Campisa system has a rounded connection, whatever the inclination of the ramp .

4-the width of the ramp is as large as possible equal to the width of the platform. Standard widths are 2000mm and 2200mm .

5-length such as to remain within the slopes that the transhipment vehicles may exceed (generally 8% and 4%) .

6-hot-dip galvanised finish for very humid environments and where intensive washing is used .

7-load capacity (concentrated on lift truck, as per EN 1398) standard at 6000kg and 9000kg (special) .


Address

7, Hassan aflaton st.
Ard el Golf - Heliopolis

Cairo - Egypt


Contacts
Email: info@mechanic.com.eg         Phone: +2 02 241 488 91   Fax:     +2 02 269 092 40